Wabenzi International

Additional Information:

• Delivery Time: 15 Days

· Clear color change – purple-to-green
· Self-adhesive for easier handling
· Superior diagnostic ink technology
· Lead free and no toxic heavy metals
· Can be used as a permanent record
· Consistent with EN ISO 11140-1 Type 6
· Cycle specific calibrations – 134°C at 3.5, 4, 5.3 and 7 mins
 

Additional Information:

• Packaging Details: Pack of 250 pcs

• · Conforms to EN ISO 11140-1 Type 4

  · Laminated (short) & Unlaminated (long)

  · Clear color change from white to black

  · Assurance to the user that minimum cycle parameters have been achieved inside the pack

  · Can be used as a permanent record

  · Cost effective

   

Additional Information:

• Packaging Details: Pack of 250 pcs

Additional Information:

• Packaging Details: Pack of 250

Helix Test Indicator Steam
The Getinge Assured Helix Test verifies air removal, steam penetration, exposure levels and deep vacuum achievement necessary for the sterilization of hollow lumen instruments. The test is designed to be used in each sterilization cycle as an independent control device.
 
The Getinge Assured Helix Test is a reusable device accompanied with single use chemical indicator strips. The indicator strips will change color from pink to black when exposed to appropriate steam sterilization conditions. The adhesive indicator strips can be used for record keeping.
Assurance to the user that maximum cycle parameters have been achieved to release the load
Cycle specific calibrations - 134C @ 3.5, 4, 5.3, 7 minutes
Re-usable holder can be used for 250 cycles, Lead free and no toxic heavy metals, Can be used as a permanent record, Helix Test 3.5 conforms to EN 867-5, Class 2, Helix Test 4, 5.3 and 7 conform to EN ISO 11140-1, Class 2

Additional Information:

• Packaging Details: Pack of 250 pcs

Additional Information:

• Packaging Details: Pack of 250 pcs.

Multicritical Process Variable Indicator Formaldehyde
The Getinge Assured Multicritical Process Variable Indicator (Formaldehyde) is designed to be used in low temperature steam/formaldehyde (LTSF) sterilizers. When used as directed the indicator gives a visual confirmation that the items being sterilized have been subjected to the following parameters of time, temperature and Formaldehyde concentration according to EN ISO 11140-1, Type 4.
 
Clear colour change from red to green, Assurance to the user that minimum cycle parameters have been achieved inside the load, Can be used as a permanent record, Cost effective, Conforms to EN ISO 11140-1, Type 4

Additional Information:

• Minimum Order Quantity: 250 Piece